#pragma once

#include <ATen/ATen.h>
#include <algorithm>
#include <cmath>

namespace quant_utils {
using namespace std;
// A structure to hold quantization parameters 'scale' and 'zero_point'.
// The meaning of these values is as the constants in the quantization equation
//
//   real_value = scale * (quantized_value - zero_point)
//
// In other words, 'zero_point' is the quantized value that corresponds
// to the real value 0, and 'scale' is the difference of real values
// corresponding to consecutive quantized values.
struct TensorQuantizationParams {
  double scale;
  std::int32_t zero_point;
  int precision;
};

inline TensorQuantizationParams ChooseQuantizationParams(
    float min,
    float max,
    int32_t qmin,
    int32_t qmax,
    bool preserve_sparsity = false,
    bool force_scale_power_of_two = false,
    bool reduce_range = false) {
  TORCH_CHECK(
      min <= max,
      "In ChooseQuantizationParams, min should be less than or equal to max");

  if (reduce_range) {
    qmin = 0;
    qmax = 127;
  }
  if (min < 0 && max > 0 && preserve_sparsity) {
    int symmetric_qmin = -((qmax - qmin) / 2 + 1);
    int symmetric_qmax = (qmax - qmin) / 2;
    double max_scale =
        std::max(fabs(min / symmetric_qmin), fabs(max / symmetric_qmax));
    min = max_scale * symmetric_qmin;
    max = max_scale * symmetric_qmax;
  }

  // We extend the [min, max] interval to ensure that it contains 0.
  // Otherwise, we would not meet the requirement that 0 be an exactly
  // representable value.
  min = std::min(min, 0.f);
  max = std::max(max, 0.f);

  TORCH_CHECK(
      qmin < qmax,
      "In ChooseQuantizationParams, qmin should be less than qmax");

  // Use double precision for intermediate computation but use single precision
  // in final number to reflect the actual number used during quantization.
  double scale = (static_cast<double>(max) - min) / (qmax - qmin);
  // If scale is 0 or too small so its reciprocal is infinity, we arbitrary
  // adjust the scale to 0.1 . We want to avoid scale's reciprocal being
  // infinity because some of fbgemm code pre-computes scale's reciprocal to do
  // multiplication instead of division in the time critical part of code.
  if (float(scale) == 0.0f || std::isinf(1.0f / float(scale))) {
    scale = 0.1;
  }
  TORCH_CHECK(scale > 0, "quantization scale should be > 0");

  if (force_scale_power_of_two) {
    if (scale < 1) {
      scale = 1.0 / (1 << static_cast<int>(floor(log(1.0 / scale) / log(2))));
    } else {
      scale = 1 << static_cast<int>(ceil(log(scale) / log(2)));
    }
  }

  // Zero-point computation.
  // First the initial floating-point computation. The zero-point can be
  // determined from solving an affine equation for any known pair
  // (real value, corresponding quantized value).
  // We know two such pairs: (rmin, qmin) and (rmax, qmax).
  // The arithmetic error on the zero point computed from either pair
  // will be roughly machine_epsilon * (sum of absolute values of terms)
  // so we want to use the variant that adds the smaller terms.
  double zero_point_from_min = qmin - min / static_cast<double>(scale);
  double zero_point_from_max = qmax - max / static_cast<double>(scale);
  double zero_point_from_min_error =
      std::abs(qmin) - std::abs(min / static_cast<double>(scale));
  double zero_point_from_max_error =
      std::abs(qmax) - std::abs(max / static_cast<double>(scale));
  double initial_zero_point =
      zero_point_from_min_error < zero_point_from_max_error
      ? zero_point_from_min
      : zero_point_from_max;

  // for symmetric quantization (preserve_sparsity == true), we force zero_point
  // to be a middle value between qmin and qmax.
  // If either min or max is 0, then we just use 0 as zero_point.
  if (min < 0 && max > 0 && preserve_sparsity) {
    initial_zero_point = (qmin + qmax) / 2 + 1;
  }

  // Now we need to nudge the zero point to be an integer
  // (our zero points are integer, and this is motivated by the requirement
  // to be able to represent the real value "0" exactly as a quantized value,
  // which is required in multiple places, for example in Im2col with zero
  // padding).
  int32_t nudged_zero_point = 0;
  if (initial_zero_point < qmin) {
    nudged_zero_point = qmin;
  } else if (initial_zero_point > qmax) {
    nudged_zero_point = qmax;
  } else {
    nudged_zero_point = nearbyint(initial_zero_point);
  }

  TensorQuantizationParams result;
  result.scale = scale;
  result.zero_point = nudged_zero_point;
  return result;
}

// This function helps to convert the Conv1D dimensions usable by the Conv2d op.
constexpr int64_t kConv1dSqueezeDim = 0;
static torch::List<int64_t> MakeArgForConv1d(const torch::List<int64_t>& arg,
                                             int64_t base_value) {
  TORCH_CHECK(arg.size() > 0, "Argument must have elements.");
  torch::List<int64_t> result({arg.get(0), base_value});
  if (arg.size() == 1) {
    result[1] = arg.get(0);
  } else {
    result[1] = arg.get(1);
  }
  result[kConv1dSqueezeDim] = base_value;
  return result;
}

} // namespace quant_utils
